BIO SOLEA 2 - COAGULOMETER 2 CHANNELS
• Opto-mechanical detection system
• Automatic start upon reagent dispensing
• Maintenance free "open" system

• All routine analysis
- PT (Prothrombin Time).
- APTT (Activated Partial Thromboplastin Time).
- TT (Thrombin Time).
- Fibrinogen.
- Plus 4 free positions for coagulation factors.

• Simple and automatic
- Works with any standard pipette.
- Self diagnostic when switched on.
TEMP LO message until the instrument reaches the working temperature.
- Automatic incubation after insertion of samples cups.
- Automatic start (measure) upon reagent dispensing.
- Results : automatically calculated, displayed and printed.

• 2-channel coagulometer.
- Supplied with balls dispenser and a disposable starting pack.
- Measuring method: Opto-mechanical (optical and mechanical ).
- Operating voltage: 110/220 V 50–60 HZ.
- Power consumption: 20 VA
- Net dimensions: 31 cm x 12,5 cm x 11 cm.
- Gross dimensions: 40,5 cm x 30,5 cm x 18 cm.
- Net weight: 2,2 kg.
- Gross weight: 4,2 kg.

• Printer (option)
DPU414 KYOLINE / KYOSHA PRINTER
+ 1 Connecting CABLE + 2 rolls thermopaper.

• Commercial Characteristics
Thousands of units of these models had been sold world-wide under various and famous brand names.

BIO SOLEA 4 - COAGULOMETER 4 CHANNELS
• Opto-mechanical detection system
• Automatic start upon reagent dispensing
• Maintenance free "open" system

• All routine analysis
- PT (Prothrombin Time).
- APTT (Activated Partial Thromboplastin Time).
- TT (Thrombin Time).
- Fibrinogen.
- Plus 4 free positions for coagulation factors.

Simple and automatic
• Works with any standard pipette.
• Self diagnostic when switched on. TEMP LO message until the instrument reaches the working temperature.
• Automatic incubation after insertion of samples cups.
• Automatic start (measure) upon reagent dispensing.
• Results : automatically calculated, displayed and printed.

Technical feature
• 4-channel coagulometer.
- Supplied with balls dispenser and a disposable starting pack.
- Measuring method: Opto-mechanical (optical and mechanical ).
- Operating voltage: 110/220 V 50–60 HZ.
- Power consumption: 30 VA.
- Net Dimensions: 33 cm x 25 cm x 11 cm.
- Gross Dimensions: 40,5 cm x 31 cm x 27,5 cm.
- Net Weight: 4,8 kg.
- Gross Weight: 6,8 kg

• Printer (option)
DPU414 KYOLINE / KYOSHA PRINTER
+ 1 Connecting CABLE + 2 rolls thermopaper.

• Commercial Characteristics
Thousands of units of these models had been sold world-wide under various and famous brand names.

SOLEA 100 - FULL AUTOMATED COAGULATION ANALYSER
- 8 reading channels
- Automatic cuvettes racks loading and waste
- Unique incubation technology
- 110 tests/h in routine mode
- Robust and fine design
- Friendly use
- Rack return for economic use
- Performances kept at elevated room temperatures (tested up to 30°C)
- 32 sample positions
- 16 reagent positions
- 8 control and calibrator positions
- Micro-volumes of reagents:
• PT: 100µL
• APTT: 50µL (Activator) + 50µL (CaCl2)

Stable cruise speed
• Perform more than 100 tests per hour in routine mode (PT+APTT+TT+FIB). The analyser optimizes the use of cuvettes racks to get the highest speed and the most reliable results.

Smart and economic use
• The very low dead volumes (0.2mL) saves reagent. Racks with unused cuvettes are returned to be used later for remaining cuvettes.

Intelligent system
• Light and sound alarms, automatic reruns, permanent check of any signal anomaly, automatic volumes checks by level sensor… all functions are available for the easiest use.

Reliability
• A production respecting the highest quality standards ensure the best reliability for such analysers.
All European components are used to build this robust system.

High flexibility
• Add reagents, samples, STATS, anywhere, anytime! or install several vials for a same parameter on board.
• Use large or small original reagent bottles, or even “Hitachi cups” for very small volumes of reagent.

Autonomy
• 32 patient positions, 16 reagent positions, 8 control and calibrator positions and racks magazine for 464 tests – all give the best autonomy to the analyser.

Technical specifications
• Performances
- Throughput : 110 PT/h
- Throughput PT+APTT+TT+FIB : 100 tests/h
- Random access processing (Patient oriented)
- Continuous operation and Stat management
- 8 measuring channels
- 2 wavelengths (Red : 620nm, Blue : 405nm)
- Chronometric, Chromogenic and immunologic tests

• Capacity
Samples
- Sample tray : 32 positions for samples + 4 dedicated positions for calibrators
- Sample cups or primary tubes
- internal barcode reader (optional)

Reagents
- Reagent tray : 16 positions + 4 dedicated positions for quality controls
- Reagents are kept at 17°C for optimal performances
- Magnetic stirring
- Reagent and sample addition during routine is possible
- Management of several reagent positions for a single reagent
- Management of several reagent racks in the software for extended capacity

Cuvettes Racks
- Cuvettes racks loader for 464 tests
- Automatic loading and waste of cuvette racks
- Refilling racks possible anytime
- Rack return for cost effective work

• Functions
- Automatic level detection
- Automatic predilution
- Automatic repeat-testing
- Automatic calibration curve calculation
- Measuring system with process monitoring
- Error monitoring during signal treatment
- Graphic display of clotting process
- Continuous access to sample status
- QC management
- Bidirectional interface
- USB 2.0 connection
- Light and sound alarms

• Highlights
- 8 reading channels
- Automatic cuvettes racks loading and waste
- Unique incubation technology
- 110 PT/h - Robust and fine design
- Friendly use
- Rack return for economic use
- Performances kept at elevated room temperatures (tested up to 30°C)
- 32 sample positions
- 16 reagent positions
- 8 control and calibrator positions